The Wolf Tooth ReMote was developed for fast, precise, and smooth dropper post actuation. It is ergonomic, durable, low-profile, and has multiple fitments available to integrate with a variety of brake clamps.

Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions.
Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here.
Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details.
Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.

Compatibility

Compatible with all cable actuated dropper posts.
Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.
Contact Wolf Tooth customer service for other post compatibility questions.

Mounting Type by Brake Model

ISPEC-EV	ISPEC-II	ISPEC-A&B
XTR M9100	XTR M9020	Saint M820
XT M8100	XTR M9000	XT M780
SLX M7100	XT M8000	SLX M670
Deore M6100	SLX M7000	Deore M615
Deore M4100	Deore M6000	XTR M980
		XTR M95
		Zee M640
Shimano model # can be found on the fluid reservoir

SRAM Brakes
MatchMaker X		Not Compatible
Guide RS	Code R	Guide T
Guide R	Code RSC	Level
Level TL	G2 R	Level T
Level TLM	G2 RS
Level Ultimate	G2 RSC
Guide RE
G2 Ultimate

Mounting Types

ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware
ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp.
ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2Nm max.
ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.
ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above)
ReMote IS-EV for Shimano I-SPEC EV - Includes IS-EV hardware

How to Install Wolf Tooth ReMote Dropper Lever

ReMote Dropper Lever Replacement Parts #RightToRepair

Color Shop - Choose Wolf Tooth anodized color components for your bike

Standard and Light Action Comparison

The ReMote Light Action lever is 25% longer which reduces the push force by 25% compared to the ReMote. The shorter lever on ReMote means that you have to push the lever a shorter distance to actuate your post which makes it quicker. Most droppers work great with both and it comes down to personal preference on the firmness of the lever feel and extension of the lever over the grip.

If you need help selecting a ReMote don’t hesitate to contact us.

Tech Specs

Weight: Shimano IS-II • 35g | SRAM MM • 38.5g | 22 (hinged clamp) • 38g | Hope • 36g | Shimano IS-EV • 35g
Material: 6061 T6 aluminum with Delrin axle
Not Included: Cable and Housing
US Patent 10473143
Made in the USA

Patent and trademark information

Compatibility

Mounting Types

Standard and Light Action Comparison

Related Products

Tech Specs

Featured Products